Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
spec | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
Water evaporation capacity Kg/h | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
Overall dimension mm |
1600×8900 | 2000×11500 | 2400×13500 | 2800×14800 | 3200×15400 | 3800×18800 | 4600×22500 |
High-pressure pump pressure Mpa | 2-10 | ||||||
Power Kw | 8.5 | 14 | 22 | 24 | 30 | 82 | 30 |
Inlet air temperature | 300-350 | ||||||
product water contents % | less than 5 percent, and 5 percent can be achieved. | ||||||
collection rate % | >97 | ||||||
electric heater Kw | 75 | 120 | 150 | When the temperature is lower then 200, the parameters should be calculated according to the practical condition. | |||
electricity + steam Mpa+Kw | 0.5+54 | 0.6+90 | 0.6+108 | ||||
hot air furnace Kcal/h | 100000 | 150000 | 200000 | 300000 | 400000 | 500000 | 1200000 |
Description
This equipment connectstwo functions,drying and granulating,together. The needed ball granule with certain size and ratio can be produced in accordance with requirements of process to adjustpressure, flow, and size of atomizing hole.
The working of the pressure spray dryer as follows: the liquid of raw material is pumped in through diaphragm pump. The liquid of raw material be atomized into tiny droplets. Then it gathers with hot air and falls off. Most parts of powder material will be collected from the outlet of the main tower's bottom. For the fine powder, we will still continuously collect them by the cyclone separator and cloth bag filter or water scupper. But it shoulddepend on the material property.
For the pressure spray dryer, it simply has bellow system :
1.Air inlet system: it consists of air flter (such as Pre & postfiter Sub-high efciency fller and high fficiencng fter)e air heater (such
as electrical heater, steam radiator,gas furnace and so on) draft fan and relative air inlet duct.
2. Liquid delivery system: it consists of diagraph pump or screw pump, material strring tank and relative pipe.
3. Atomizing system: pressure pump with inverter.
4. Main tower: it consists of the conical sections, straight sections, air hammer, lighting device,manhole and so on.
5. Material collecting system: it consists of cyclone separator and cloth bag filter or water scraper.This parts should be equipped based on customer needs.
6. Air outlet system: it consists of suction fan, air outlet duct and post filter or High efficiency flter(For the filter chose, it is based on the customer request.)
Features
1.High cllecting rate;
2.No stick onto the wall;
3. Fast drying;
4. Energy saving;
5. High efficiency;
6. Especially applicable for heatsensitive material;
7. For the heating system for the machine, it is very flexible. We can configure it based on the customers' specific conditions such as steam,electricity, gas furnace and so on, all of them we can design it to match our spray dryer;
8. Control system has more choices, such as push button, hmi+plc and So on.
Food Industry: Fatty milk powder, protein, cocoa milk powder, substitute milk powder, egg white (yolk), food and plant, oats, chicken juice, coffee, instant dissoluble tea,seasoning meat,protein, soybean, peanut protein, hydrolysate and so forth. Sugar, corn syrup, corn starch, glucose. pectin, malt sugar,sorbic acid potassium and etc.
Medicine: Traditional Chinese medicine extract, ointment, yeast, vitamin, antibiotic, amylase, lipase and etc.
Plastic and resin : AB, ABS emulsion, uric acid resin, phenolic aldehyde resin,urea-formaldehyde resin, formaldehyde resin, polythene, poly-chioroprene and etc.
Detergent :common washing powder, advanced washing powder, soap powder, soda ash, emulsifier, brightening agent, orthophosphoric acid and etc.
Chemical industry :Sodium fluoride (potassium ), alkaline dyestuff and pigment, dyestuff intermediate, Mn3O4, compound fertilizer, formic silicic acid,catalyst, sulphuric acid agent, amino acid, white carbon and so on.
Ceramic :aluminium oxide, ceramic tile material, magnesium oxide, talcum and so on.
Other :Calmogastrin, hime chloride, stearic acid agent and the cooling spray.
Changzhou Yibu Drying Equipment Co., Ltd is a leading manufacture of drying, mixing, granulating equipemnt in the main land of China, a specially- designated enterprise of China Association of Pharmaceutical Equipment and China General Chemical Equipment Corporation, covers more than 50, 000sq. M, holds RMB 38 million of fixed assets and has more 180 sets of special processing equipment and powerful technical force, own the provincial famous trademark "YIBU". It can produce more 1, 500 stes of different. At present, there are 28 kinds and over 160 of specifications and varieties. The credit level is AAA for the passing days. ISO9001 & ISO1400 are approved.
The founder, Mr Zha Guocai devotes research, manufacture, production and business of drying equipment for over thirty years, holds the post of Deputy Director-General of China Drying Equipment Association for a long time.
The company pays much attention to science and technology renovation. First or later, it has cooperated with the institutes that are Shanghai, Wuhan, Chongqing and so on, and cooperated with Shenyang Chenmical Institute, Ministry of Chemical Industry, Qinghua University, Shanghai transportation University, Dalian Science and Technology University. Therefore the company can put 3-5 new varieties into the market every year. In 1998, through approval of state relevant departments, the company set up China Research Center of Drying and Granulating, that can research new process and develop new technology and provide new products for pharmaceutical, chemical and foodstuff industries. We have many testing machine in our lab for to make trials for clients.
We've sold equipment to USA, Mexico, Columbia, Guatemala, Brazil, Peru, Australia, New Zealand, Ghana, Russia, Cyprus, Greece, Iran, Indonesia, Philippines, Korea, Japan, Taiwan, Hongkong and so on totally nearly 50 countries and districts around the planet.