Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. The working process of the cone vacuum screw belt dryer is intermittent batch operation. After the wet material enters the silo, heat is supplied through the inner jacket of the cylinder wall and the propeller, so that the heating area reaches 140% of the entire container area, and the material is heated and dried. . And choose the corresponding cone type dry mixer model (working volume) to achieve the ideal drying effect. The mixing dryer adopting the upper drive structure has the characteristics of drying and mixing, as well as sufficient space, which is more convenient for users to carry out maintenance and repair.
2. Smooth operation and protection of crystal form:
Vertical single-conical ribbon Mixer dryer does not use any auxiliary tools during the drying and mixing process. It only uses the revolution and rotation of the cone-shaped stirring screw, which makes the material in addition to the lifting from the stirring screw and is continuously sheared and dispersed, ensuring the inside of the silo The material can get movement, and it can make the material not squeezed by any other external force except the lifting from the propeller, which avoids the ineffective friction between the powder and the equipment and the powder grain, which is often It is the main factor leading to the destruction of the crystal form of the material. This is the fundamental reason why LDG series Vertical single-conical spiral ribbon vacuum dryer can keep the crystal form of the material intact during the operation.
3. The top drive eliminates the possibility of pollution caused by the shaft seal to the product:
Using top drive, relative to the bottom drive, the device can avoid the following disadvantages:
The stirring paddle must be disassembled with special equipment for cleaning and maintenance
Mixing paddle shaft seals are difficult to achieve true sealing without pollution, lack of quality assurance.
4.Low operating energy cost and high mixing efficiency:
Vertical single-conical ribbon Mixer dryer is driven by a motor. The design is unique. The spiral driven by the motor is used to lift the material, and there is no separate energy consumption for cutting. It is particularly worth mentioning that, in the mixing and drying process, the traditional mixing and drying equipment provides a belt-type stirring paddle. Its working principle is that during the stirring movement, the moving material is like a whole, and a large amount of energy consumption is used for the circular movement of the whole material, so the drying efficiency provided by this stirring is low. The LDG series of Vertical single-conical spiral ribbon vacuum dryer provides a conical spiral stirring. The entire stirring paddle moves circularly around the axis of the conical silo to ensure that the materials in different parts of the entire container can be stirred. To proceed, gradually lift the material at the bottom of the silo to the upper part of the container, and then let it fall naturally, so circulating. This stirring mode makes the materials in the container uniformly mixed, which eliminates the possibility of agglomeration of the materials during the drying process, and greatly improves the mixing and drying efficiency of the materials. And it has the advantages of wide processing range and low energy consumption per unit mass.
Item | LDG-500 | LDG-1000 | LDG-1500 | LDG-2000 | LDG-3000 | LDG-4000 | LDG-5000 | LDG-6000 | LDG-8000 |
Full volume (m3) | ≥0.5 | ≥1.0 | ≥1.5 | ≥2.0 | ≥3.0 | ≥4.0 | ≥5.0 | ≥6.0 | ≥8.0 |
Filling coefficient | 0.7 | ||||||||
Heating area(m2) | 2.9 | 4.6 | 6.0 | 7.5 | 9.2 | 11.0 | 13.2 | 15.5 | 17.8 |
Motor power(Kw) | 5.5 | 7.5 | 11 | 15 | 22 | 30 | 37 | 45 | 55 |
Stirring speed(rpm) | 5~35 rpm | ||||||||
Inner diameter Of single-conical barrel(mm) |
1100 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 | 2600 | 2800 |
Total height of the equipment (m) | 2.6 | 3.1 | 3.4 | 3.8 | 4.2 | 4.6 | 5.0 | 5.4 | 6.0 |
1. Are you a manufacturer , trading company or a third party
Answer: We are professional manufacturer ,together with the trading business . we have started our production on 1970 based on the right of state .it became private company in 1995
2. Where is your factory located
Answer: Our company is located in Zhenglu Town,Tanning district ,Changzhou city ,Jiansu province,China .it is in the middle of Shanghai and Nanjing .
3. How can I go to your factory ?
Answer: You can fly to shanghai pudong or hong qiao international airport directly ,and then take the high speed train or bus to Changzhou station and then we can pick you up at changzhou station for our company . Our company is around 30~40km away from the changzhou station.
If you are in China now , you can fly to Changzhou Benniu airport or Wuxi airport ,or take the train or bus to our city directly .
We sincerely welcome to visit our company at any time
4. What's your mini order ?
Answer: Our mini order is one set .
5. Is there any certificate of YIBU ?
Answer: Yes, we got ISO9001:2008 Quality Management System Certificate,ISO14001:2004 Environmental Management System Certificate, CE;SGS;TUV;GOST;UL;EAC also we got 60 item patent;
6. Is the machine easy to performance update?
Answer: YES. YIBU adopt the modularity design technology .YIBU can improve the dryer performance to extend the dryer's long time service. Our dryer is easy to disassemble, clean and maintenance;