Zlg Series White Carbon Spray Dryer for Chinese Traditional Medicine Extract

Product Description

 

Product Description

ZLG Spray dryer machie for foodstuff powder
The machine adopts full seal from. All parts are made of stainless steel. It is equipped with three grades of filter. The filtered air is one hundred thousand grades. The cooling device of wall is installed at the cylinder body. It makes the wall temperature less than 80° C. Air sweeping device is installed inside the drying tower. The product will not be burnt or deteriorated even stays on the way. The collection rate of powder is raised greatly. Moreover will not cause medicine mixed or wall stick.

Basic Principle: High-speed centrifuge atomizing for the extract of traditional Chinese medicine is an application of centrifuge atomizing technique. It is an high-speed atomizing dryer. The following problems are solved.

(1). Adopted three-grade air filter, the inlet air is one hundred thousand grade.
(2). Adopted wall cooling device, the temperature of inner wall will be on more than 80° C. Even if raw material is stayed on the wall, it will not be burnt.
(3). Its whole volume is 3.5 times of standard LPG high-speed atomizing dryer.
(4). Adopted quick washing device, it is can meet the requirements of production for varieties if products.
(5). Adopted wet-dedusting, there is no powder dust out. It is in conformity with the requirements of GMP.
(6). Adopted air sweeping device, the clean effect is satisified.
(7). Equipped with two sets of atomizer and adopted frequency inverter control.
(8). Adopted PLC control and display, and adapted frequency control.
(9). Equipped with washing device on request.
(10). Adopted the seal transport by dry air on request.

1. Tower body has air cooled jacket.
2. Tower body is equipped with automatic vibration device.
3. Tower body and pipe line have cleaning hole and sewage discharge hole that can open quickly.
4. Thermostat feeding tank on request.
5. Mannal high pressure washing machine on request.
6. The parts that can contact raw material are made of stainless steel (all entirely stainless steel).
7. The collecting of raw material adopts two grades cyclone or one-grade cyclone and one-grade wet-method-deduster.
8. The temperature of inlet air can be controlled automatically and continuously.
9. Equipped with air sweeping device on request.
 

Product Parameters

spec		ZLG-25	ZLG-50	ZLG-80	ZLG-100	ZLG-150	ZLG-200	ZLG-300
evaporation capacitykg/h		25	50	80	100	150	200	300
process amount of material liquidkg/h		25-34	50-68	80-108	100-135	150-203	200-270	300-406
output of finished productkg/h		4.8-7.2	9.2-14	14.8-22.4	18.4-28	28-42	36.8-56.4	55-85
solid content of material liquid		18-25
moisture content of finished product		March 5
electric powderkw		63	99	132	153	204	246	330
heat source		steam plus electricity
collecting method of product and its efficiency		two-grade cyclone or one-grade cyclone and one-grade web-method dedusted of 95
automatic control meters and instruments		indicator of not air and exhaust air temperature
temperature of air inlet		150-200
temperature of air outlet		80-100
overall dimensions(mm)	L	7000	8000	9800	11000	12200	14100	15000
	W	4000	5000	5700	6200	7000	7800	9000
	H	6900	7400	8000	8900	10000	11000	12000

 

Company Profile

Changzhou Yibu Drying Equipment Co., Ltd is a leading manufacture of drying, mixing, granulating equipemnt in the main land of China, a specially- designated enterprise of China Association of Pharmaceutical Equipment and China General Chemical Equipment Corporation, covers more than 50, 000sq. M, holds RMB 38 million of fixed assets and has more 180 sets of special processing equipment and powerful technical force, own the provincial famous trademark "YIBU". It can produce more 1, 500 stes of different. At present, there are 28 kinds and over 160 of specifications and varieties. The credit level is AAA for the passing days. ISO9001 & ISO1400 are approved.
The founder, Mr Zha Guocai devotes research, manufacture, production and business of drying equipment for over thirty years, holds the post of Deputy Director-General of China Drying Equipment Association for a long time.
The company pays much attention to science and technology renovation. First or later, it has cooperated with the institutes that are Shanghai, Wuhan, Chongqing and so on, and cooperated with Shenyang Chenmical Institute, Ministry of Chemical Industry, Qinghua University, Shanghai transportation University, Dalian Science and Technology University. Therefore the company can put 3-5 new varieties into the market every year. In 1998, through approval of state relevant departments, the company set up China Research Center of Drying and Granulating, that can research new process and develop new technology and provide new products for pharmaceutical, chemical and foodstuff industries. We have many testing machine in our lab for to make trials for clients.

We've sold equipment to USA, Mexico, Columbia, Guatemala, Brazil, Peru, Australia, New Zealand, Ghana, Russia, Cyprus, Greece, Iran, Indonesia, Philippines, Korea, Japan, Taiwan, Hongkong and so on totally nearly 50 countries and districts around the planet.

Uses

Certifications

 

Packaging & Shipping

 

 

FAQ

Our Services

Pre-service
1. Act as a good adviser and assistant of clients to enable them get rich and generous returns on their investments.
2. Introduce the product to the customer in detail, answer the question raised by customer carefully;
3. Make plans for choice according to the needs and special requirements of users in different sectors;
Sale service
1. Ensure product with high quality and pre-commissioning before delivery;
2. Delivery on time;
3. Provide full set of documents as customer's requirements.
After-sale service
Provide considerate services to minimize clients' worries.
1. Assist clients to prepare for the first construction scheme;
2. Install and debug the equipment;
3. Train the first-line operators;
4. Examine the equipment;
5. Take initiative to eliminate the troubles rapidly;
6. Provide technical support;
7. Establish client file system.
Service commitment
1. Provide clients one-year warranty to make sure the machine work well;
2.We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely;
Our Advantages
1. High quality and professional manufacturer
2. Advanced equipment for testing and manufacturing
3. Customized service according to your inquiry
4. Short manufacturing time
5. Good after-sale service
FAQ
1. Are you a manufacturer , trading company or a third party
Answer: We are professional manufacturer ,together with the trading business . we have started our production on 1970 based on the right of state .it became private company in 1995
2. Where is your factory located
Answer: Our company is located in Zhenglu Town,Tanning district ,Changzhou city ,Jiansu province,China .it is in the middle of Shanghai and Nanjing .
3. How can I go to your factory ?
Answer: You can fly to shanghai pudong or hong qiao international airport directly ,and then take the high speed train or bus to Changzhou station and then we can pick you up at changzhou station for our company . Our company is around 30~40km away from the changzhou station.
If you are in China now , you can fly to Changzhou Benniu airport or Wuxi airport ,or take the train or bus to our city directly .
We sincerely welcome to visit our company at any time
4. What's your mini order ?
Answer: Our mini order is one set .
5. Is there any certificate of YIBU ?
Answer: Yes, we got ISO9001:2008 Quality Management System Certificate,ISO14001:2004 Environmental Management System Certificate, CE;SGS;TUV;GOST;UL;EAC also we got 60 item patent;
6. Is the machine easy to performance update?
Answer: YES. YIBU adopt the modularity design technology .YIBU can improve the dryer performance to extend the dryer's long time service. Our dryer is easy to disassemble, clean and maintenance;